WTS: Complete C32/C55 brake kit ff & rr

[Guest gianfranc]

Included are the front 4 pot brembo calipers with 345x28mm crossed drilled & slotted discs and the rear 2 pot ATE calipers with 300x22mm Brembo crossed drilled discs. Fronts come with porterfield pads installed and rears come with stock pads installed. I will include a brand new set of pads front and rear from porterfield. Pads are made of carbon kevlar and are almost dust free as well as perform as well if not better than stock. No squealing as well. They are imported from the US and they cost US$169 for the fronts and US$110 for the rears.

http://porterfield-brakes.com/index.php

Brakes are bought 1st hand by me from Benzline and have been used for 15,000km. It's from a w203 c32/c55 but can also fit w202, w208, w209, w210, r170 and r171. It's off my w208 clk.

The front discs were bought brand new and are custom slotted. Stock discs are only crossed drilled, thereby giving my discs a more aggressive look.

The rear discs are custom made by brembo and I believe am the only person in Asia with them. They were made by brembo for a group buy on Mbworld some 4 years back. These are high quality discs that were made from scratch to be crossed drilled. This is opposed to the aftermarket ones out there that were drilled after being cast thereby weakening the disc.

http://www.mbworld.org/forums/c32-amg-c55-amg-w203/116058-group-buy-brembo-cross-drilled-rear-rotors-c32-c55.html

Braking power compared to my stock brakes is very noticeable and it makes my car look a lot better.

I will take pics for those who are interested. Would rather sell as a set. Pls send me decent offers to 97911624. Pls consider custom equipment and price of pads when making offers. Thanks for looking!

[Guest gianfranc]

Sorry guys. I'm holding on to these for a while. Have some change in plans.