FS : Original 17' Oettinger RE rims (without tyre)

[Guest evo30]

Changed to other design of rims, hence, selling my original 17' silver Oettinger "Type RE" rim (made in Germany), 5x112, +35 offset, it is a deep dish design. The rims was fitted on my Audi A4 but I was told it is same PCD as Merc's so post to sell here.

Rims condition are very good, except one rims' edge got minor "peel-off" of its coating, but no kerb rash nor warp at all. Pictures of rims are avail upon request via email -[email protected], asking $1k neg.

Pls refer to the link :

http://www.oettinger.com.au/oau_rim_popup2.html

The rims are ready for collection now from Bt. Panjang. Pls sms (only) me at 94523691 or PM me for further details. cheers!

[Guest alumetal]

Bolt pattern are similar to Mercedes vs Audi A4.

But the centre bore may be diff.

Merc centre bore is 66.6mm

[Guest evo30]

I measured the bore centre myself and noted that it is indeed more than 60mm and hence, I believe this set can fit Merc as well. Cheers!

[Guest kepiting1sg]

evo30 wrote:

I measured the bore centre myself and noted that it is indeed more than 60mm and hence, I believe this set can fit Merc as well. Cheers!

IMHO,

If your A4 is B8 your center bore of your rim is 66.6mm and will suit the Merc center bore.

However if your A4 is B6 or B7, your rims center bore will be only 57.1mm and not suitable for use on the Merc.

[Guest evo30]

Hi! Bro,

My RE rims come with Centre Hub rings to fit my B7 and without the centre hub rings, the centre bore of the rim is abt 60mm+ (I measure myself) and hence, I believe it may be suitable for Merc also. Cheers!

[Guest evo30]

Up for sales!